All the cameras supported by LUMOplay include a USB cable. In most cases, these cables are 1m - 2m long. If you plan to install your camera further from the computer, you will a USB extension cable.
Orbbec Astra 1
Recommended cable (tested): StarTech.com 10m (32.8 ft)USB 3.0 (5Gbps) Extension Cable with AC Power Adapter - Shielded - Male to Female USB 3.2 Gen1 Type A Extender
The original Orbbec Astra has a connected USB A cable which cannot be removed, you will need an active USB extension cable with one type A male end and one type A female end. This cable should be rated for at least USB 3.0 or higher.
NOTE: An active cable will include a power cable that plugs into an outlet.
The male end will plug into your computer and the female end will connect to your camera.
RealSense D435f and Orbbec Astra 2
Recommended cable (tested): Newnex 5m - 8m Active USBc - USB 3.0 (10Gbps)
RealSense cameras and newer Orbbec cameras like the Astra 2 and the Gemini 2 have a removable USB-C cable. You can add an extension to the included camera or replace the shorter cable that is included with your camera with a longer, active USB-C cable.
Realsense lists Newnex as their official cable partner.
Customer recommendation
Scott R. of Encore Global shared his cable experience when building a 4 camera installation. While we haven't tested this option ourselves, it is worth exploring for large scale experiences.
The Startech C100043-USB-EXTENDER works with the Orbbec Astra 2 cameras using a 200 foot long CAT6A SSTP shielded cable. The extender has 4 ports, there is only enough bandwidth on the extender to drive a single camera. If you plan to use multiple cameras, you will need to purchase a separate USB-C to USB-A cable to use with these extenders with the Astra 2, as the Astra 2 ships with a USB-C to USB-C cable.
Scott combined this extender with an powered USB extension, but it would be easier for most installations to use longer CAT6A cabling. The Startech unit is rated for cabling up to 100M/328 feet.
Maximum cable length
Do not use extension cables that are longer than 4.9m (16') unless choosing a tested cable through a direct link provided by LUMOplay.
Buy an extension that is just long enough for your project to avoid signal degradation and input lag.
If your project requires more distance between the camera and the computer, there are specific cables available for the RealSense D435f camera: https://www.newnex.com/realsense-3d-camera-connectivity.php
Plug the cable into the correct port
Make sure you plug your cable into the appropriate port. For USB A cables, plug them into a USB 3.0 port (these are usually marked with a blue color on the inside.) For USB-C ports, ensure you are using a fast data port and not a charging port. If you're not sure what kind of ports your computer has, here's how you can check them in your device manager.
Make sure the cable has power
As mentioned before, active USB extension cables will include a power cable that plug into an outlet. Without external power, the cable will not work, so make sure you plug the cable in before you test your system.
We're here to help!
If you're not sure about the cable or any other hardware you're considering for your LUMOplay project, contact us! We're happy to look at your equipment links.