4 - Mask – LUMOplay

Note: This section is disabled for Mouse/Touch and Touchscreen setups.

In this section you will mask the area where people will interact with LUMOplay.

For Wall (Close-Up), Floor, and Wall Ball

This allows you to specify where the projection lies in the camera's field of view. Make sure the projector is turned on during this step.

Look at the live feed from the camera in LUMOplay. Notice that the upper-left corner has a small circular indicator. Use the 2 buttons on the left side of the screen to flip the display vertically or horizontally so that the circular indicator appears in the top left corner.
Click and drag all four mask handles so that they line up with the corner markers in the live feed.

For Wall (Full Body) and TV or Monitor

This allows you to specify where people must stand in order to interact with the camera.

Use the 2 buttons on the left side in order to flip the camera feed to ensure it is aligned correctly.
Optionally, click and drag the four mask handles to increase or decrease the motion tracking area.

4 - Mask