This article is for an older version of Lumo Play. For the most recent version, see this article
Web cameras work well in areas with plenty of light, but will not operate in darkness.
Web cameras work well for wall installations where you point the camera at players.
We do not recommend that you use a web camera for floor Installations or any setup where the camera is pointing directly at the projection or display.
Usually, the default settings already have good detection of movement and you won’t need to re-calibrate.
If you need to make adjustments make sure you have a friend to help you during this process.
Determines how bright the camera feed is.
Move the slider to the right to add contrast to the camera feed. Move the slider to the left remove contrast in the camera feed.
Removes noise from the camera feed.
Determines how sensitive the games will be to changes in depth (how near or far something is).
Used for specific types of games. Unless you know that your game requires Delay, do not change this setting.
Once you've completed setting up your calibration, click Next to launch Lumo Play.