This article is for the most recent version of Lumo Play. For articles on older versions, go here
This step of calibration allows you to choose what device Lumo Play uses to track motion. Make sure all of your equipment is connected and powered on, with the appropriate drivers installed on your computer before attempting to calibrate Lumo Play.
For more information on how to set up your hardware, see our equipment setup guides.
To choose your camera:
1) Click on the camera you want to use from the list. A live video from that camera appears to the right side of the list. If the device you want to use does not appear in the list, click the Reload button in the upper-right corner
2) Click next once you have selected the appropriate camera.
Depending on the setup you are using certain cameras are not recommended. For installations where the camera is pointed directly at the projection or screen (e.g. Floor, Wall (Close-Up), or Wall Ball) you should not use a USB webcam; use a 3D camera like the Orbbec Astra or the Microsoft Kinect for Xbox One instead.